Why consider an Air-Sourced Hot Water Heat Pump System?
An air-sourced heat pump absorbs heat from the air and transfers it to heat water. It runs on electricity but is roughly three times more efficient than a conventional electric water heater. It is designed to save energy, save money and reduce greenhouse gas emissions.
Why purchase a Sanden Eco Plus® Hot Water Heat Pump System?
The superior design of a Sanden Eco Plus® Hot Water Heat Pump ensures: • Industry leading energy efficiency using only 22% of the energy required by an electric storage hot water system. • Innovative technology - up to 50% faster heat recovery than currently available Hot Water Heat Pumps. • Perfect to use with Off-Peak Electricity for even more savings. • The most STC rewards for energy efficiency, means you enjoy a greater discount on the purchase price. • Class leading warranties, backed by Sanden’s 35 years of operation in Australia. • Split system for ease of installation and near silent operation. |
How a Sanden Eco Plus® System Works
A heat pump is a device that uses a small amount of energy to move heat from one location to another. It contains a fan that forces air through an evaporator that contains a refrigerant. The heat in the air passes through the evaporator and is absorbed by a natural refrigerant, R744 (CO2 ), which is ozone friendly and does not contribute to global warming. The warm gaseous refrigerant is circulated in the system via a compressor. As it passes through the compressor, its pressure rises, as does its temperature. This hot refrigerant then passes through a heat exchanger to heat the water, which is finally pumped to the storage tank.
A heat pump is a device that uses a small amount of energy to move heat from one location to another. It contains a fan that forces air through an evaporator that contains a refrigerant. The heat in the air passes through the evaporator and is absorbed by a natural refrigerant, R744 (CO2 ), which is ozone friendly and does not contribute to global warming. The warm gaseous refrigerant is circulated in the system via a compressor. As it passes through the compressor, its pressure rises, as does its temperature. This hot refrigerant then passes through a heat exchanger to heat the water, which is finally pumped to the storage tank.
Superior Features & Benefits
Unlike other hot water heat pump systems, the Sanden Eco® system uses a smarter split system where the heat pump unit and stainless steel tank are installed separately. This allows easy on-site handling and installation, as well as flexibility of the storage tank location, which can be up to 4 metres distance from the heat pump unit. Heat Pump Unit • A high Coefficient of Performance (COP=4.5^) results in significantly reduced energy use and CO2 emissions • Up to 50% faster heat recovery than typical heat pumps. In ambient air of 20ºC it takes approx 4 hours to heat 315 L of water from 17ºC to 65ºC. • Uses unique Ozone friendly R744 (CO2) refrigerant. • Simple installation by Plumber & Electrician, with no Refrigeration Mechanic required. • An automatic heating cycle, which makes it perfect for use with Off-Peak tariff. • Fitted with in-built freeze protection, making it suitable for all climates (ie. -10ºC to +43ºC operating range). • No backup element required. • Whisper quiet operation, with industry leading noise level of 38dB - very neighbour friendly! • High quality, weather resistant construction for outdoor location. • 3 year Warranty. Stainless Steel Tank • 3 x tank sizes offered – 160L, 250L and 315L. • High quality, Australian made extra long life stainless steel cylinder. • Fully insulated for minimal heat loss. • Mains pressure rated. • 315 litre Tank with two installation options (tall with a reduced diameter or short with an increased diameter). • Safety pressure and temperature relief valve supplied. • 15 year Warranty |
Guarantee
Years of worry free hot water – we guarantee it Every Sanden Eco® Hot Water Heat Pump System is fully backed by our extended warranties. Sanden Eco® Hot Water Heat Pump units feature a 3 year warranty, while the stainless steel storage tank has a class leading 15 year warranty, providing you with peace of mind when installing your Sanden Eco® Hot Water Heat Pump System. For full warranty conditions, please refer to www.sanden-hot-water.com.au The Sanden warranty applies alongside, and in addition to, any rights or remedies to which you may be entitled under the Australian Consumer Law. For detailed information, download the brochure here Why Choose Sanden?
|
Copyright© 2011 SANDEN International (Australia) Pt Ltd. All Rights Reserved. Reproduced with permission.